D-Link DWL-2600AP User Manual - page 696
Configuring Differentiated Services for VoIP
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 696
D-Link UWS User Manual
10.
From the Available Class List menu, select class_voip, and then click
Add Selected Class
.
11.
From the Available Class List menu, select class_ef, and then click
Add Selected Class
.
12.
Go to the
Policy Class Definition
page and configure how classes that match the policy are handled.
The following steps configure this policy so that incoming packets already marked with a DSCP value of “EF”
(per the class_ef definition), or marks UDP packets (per the class_voip definition) with a DSCP value of “EF.”
In both cases, the matching packets are assigned internally to use queue 5 of the egress port to which they
are forwarded.
a. Select pol_viop from the Policy Selector menu, class_ef from the Member Class List menu, and Assign
Queue from the Policy Attribute Selector, and then click
Configure Selected Attribute
.
b. In the Queue ID Value field, enter 5, and then click
Submit
.
c. Select pol_viop from the Policy Selector menu, class_voip from the Member Class List menu, and Assign
Queue from the Policy Attribute Selector, and then click
Configure Selected Attribute
.
d. Select ef from the DSCP Keyword menu, and then click
Submit
.
e. Select pol_viop from the Policy Selector menu, class_voip from the Member Class List menu, and Mark
IP DSCP from the Policy Attribute Selector, and then click
Configure Selected Attribute
.
f. Select ef from the DSCP Keyword menu, and then click
Submit
.
13.
To attach the defined policy to an inbound service interface, go to the
Service Configuration
page.
14.
Select interface 0/2 from the Slot/Port menu.
15.
Select pol_voip from the Policy In menu.
16.
Click
Submit
.