D-Link DWL-2600AP User Manual - Wds Link Create
Configuring the Wireless Distribution System
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 649
D-Link UWS User Manual
Command Buttons
The page includes the following buttons:
•
Add
—Allows you to configure a new WDS link for the selected group. When you click
Add
, the
WDS Link
Create
page displays.
•
Submit
—Select the checkbox associated with a link to modify the Link Cost value. Click
Apply
to update
the switch with the value you enter.
•
Delete
— Deletes the selected WDS link.
•
Refresh
—Updates the page with the latest information.
WDS Link Create
When you click
Add
from the WDS AP Link Configuration page, the
WDS Link Create
page displays. From this
page, you can create WDS links between APs in the WDS group.
Figure 407: WDS Link Create
The following table shows the fields available on the
WDS Link Create
page.
Note:
If no links have been configured for the selected WDS group, only the
Add
and
Refresh
buttons
display.
Note:
After you change WDS-Managed AP group settings, make sure you push the configuration to
other switches in the cluster.
Table 373: WDS Link Create
Field
Description
Source AP MAC Address
MAC Address of the source AP.
Note:
The WDS links are bidirectional. The terms
Source
and
Destination
simply help to differentiate between the WDS link endpoints.
Source AP Radio
The radio number of the WDS link endpoint on the source AP.
Destination AP MAC Address
The MAC address of the destination AP in the group.
Destination Radio
The radio number of the WDS link endpoint on the destination AP.