D-Link DWL-2600AP User Manual - Interface Configuration
Configuring and Viewing ISDP Information
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 151
D-Link UWS User Manual
Interface Configuration
From the ISDP
Interface Configuration
page, you can configure the ISDP settings for each interface. To display
the
ISDP
Cache Table
page, click
LAN > Administration > ISDP > Interface Configuration
in the navigation tree.
Figure 72: ISDP Interface Configuration
The following table describes the fields available on the ISDP
Interface Configuration
page.
Holdtime
Displays the ISDP holdtime for the neighbor.
Capability
Displays the ISDP Functional Capabilities for the neighbor.
Platform
Displays the ISDP Hardware Platform for the neighbor.
Port ID
Displays the ISDP port ID string for the neighbor.
Protocol Version
Displays the ISDP Protocol Version for the neighbor.
Last Time Changed
Displays when entry was last modified.
Note:
If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to
transmit ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the
interface will not transmit ISDP packets, regardless of the mode configured on the interface.
Table 64: ISDP Interface Configuration
Field
Description
Slot/Port
Select the interface with the ISDP mode status to configure or view.
ISDP Mode
Use this field to enable or disable the Industry Standard Discovery Protocol on
the selected interface.
Table 63: ISDP Cache Table (Cont.)
Field
Description