D-Link DWL-2600AP User Manual - page 427

Port Access Control

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 427

D-Link UWS User Manual

Authenticator PAE State

This field displays the current state of the authenticator PAE state machine. 

Possible values are as follows:

• Initialize

• Disconnected

• Connecting

• Authenticating

• Authenticated

• Aborting

• Held

• ForceAuthorized

• ForceUnauthorized

Backend Authentication State

This field displays the current state of the backend authentication state 

machine. Possible values are as follows:

• Request

• Response

• Success

• Fail

• Timeout

• Initialize

• Idle

Quiet Period

Displays the configured quiet period for the selected port. This quiet period is 

the value, in seconds, of the timer used by the authenticator state machine on 

this port to define periods of time in which it will not attempt to acquire a 

supplicant. The quiet period is the period for which the authenticator does not 

attempt to acquire a supplicant after a failed authentication exchange with 

the supplicant. The quiet period is a number in the range of 0 and 65535.

Transmit Period

Displays the configured transmit period for the selected port. The transmit 

period is the value, in seconds, of the timer used by the authenticator state 

machine on the specified port to determine when to send an EAPOL EAP 

Request/Identity frame to the supplicant. The transmit period is a number in 

the range of 1 and 65535.

Guest VLAN ID

Displays the Guest VLAN ID configured on the interface. The valid range is 0 to 

3965.

Guest VLAN Period (secs)

Displays the Guest VLAN period for the selected port. The Guest VLAN period 

is the value, in seconds, of the timer used by the Guest VLAN Authentication. 

The value is in the range of 1 to 300.

Supplicant Timeout

Displays the configured supplicant timeout for the selected port. The 

supplicant timeout is the value, in seconds, of the timer used by the 

authenticator state machine on this port to timeout the supplicant. The 

supplicant timeout is a value in the range of 1 and 65535.

Server Timeout

Displays the configured server timeout for the selected port. The server 

timeout is the value, in seconds, of the timer used by the authenticator on this 

port to timeout the authentication server. The server timeout is a value in the 

range of 1 and 65535.

Table 251:  Port Access Control Status Fields (Cont.)

Field

Description