D-Link DWL-2600AP User Manual - Ip Interface Configuration

Configuring Global and Interface IP Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 295

D-Link UWS User Manual

IP Interface Configuration

Use the IP Interface Configuration page to update IP interface data for this switch. 

To display the page, click 

LAN > L3 Features > IP > Interface Configuration 

in the navigation tree.

Figure 188:  IP Interface Configuration

Table 172:  IP Interface Configuration Fields

Field

Description

Interface

Select the interface to configure from the dropdown menu. The dropdown 

menu contains logical interfaces, including loopback interfaces and VLAN 

routing interfaces. 

Routing Interface Status

Shows whether the IPv4 routing is up or down on the interface.

IP Address Configuration 

Method

Specify whether the selected interface should receive an IP address 

dynamically through DHCP, or statically through manual IP address 

assignment.

If you configure DHCP as the method, additional buttons display at the bottom 

of the page that allow you to renew, release, or display DHCP-assigned 

information.

IP Address

If the configuration method is manual, enter the static IP address for the 

interface. 

Subnet Mask

If the configuration method is manual, enter the subnet mask for the 

interface. This is also referred to as the subnet/network mask, and defines the 

portion of the interface's IP address that is used to identify the attached 

network.