D-Link DWL-2600AP User Manual - page 369
MAC Access Control Lists
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 369
D-Link UWS User Manual
Adding a New Rule to a MAC-based ACL
Once you configure a MAC ACL, you can add rules to the ACL.
1.
Open the
MAC ACL Rule Configuration
page.
2.
If more than one MAC ACL is configured on the system, select the desired ACL from the MAC ACL menu.
3.
From the
Rule
menu, select Create New Rule.
4.
Enter a new ID number for the rule.
5.
Configure the remaining rule criteria as needed.
6.
Click
Submit
.
The new rule is assigned to the specified MAC-based ACL.
Removing a Rule From a MAC-based ACL
1.
From the
MAC ACL Rule Configuration
page, select an ACL from the
MAC ACL
field.
2.
Select a rule from the
Rule
menu
.
3.
Click
Delete
.
The rule is removed from the MAC-based ACL, and the device is updated.
EtherType Key
Requires a packet’s EtherType to match the EtherType you select. Click
Configure
, and then select the EtherType value from the dropdown menu. If
you select User Value, you can enter a custom EtherType value.
Ethertype User Value
This field only appears if you select User Value from the EtherType dropdown
list. The value you enter specifies a customized Ethertype to compare against
an Ethernet frame. The valid range of values is (0x0600 to 0xFFFF).
Source MAC Address
Requires a packet’s source port MAC address to match the address listed here.
Click
Configure
, and then enter a MAC address in the appropriate field. The
valid format is xx:xx:xx:xx:xx:xx.
Source MAC Mask
If desired, enter the MAC mask for the source MAC address to match. Use F’s
and zeros in the MAC mask, which is in a wildcard format. An F means that the
bit is not checked, and a zero in a bit position means that the data must equal
the value given for that bit. The valid format is xx:xx:xx:xx:xx:xx. Click
Submit
or
Cancel
to return to the Rule Configuration page.
VLAN
Requires a packet’s VLAN ID to match the ID listed here. Click
Configure
, and
then enter the VLAN ID to apply this criteria. The valid range is 1–3965. Either
VLAN Range or VLAN can be configured. Click
Submit
or
Cancel
to return to
the Rule Configuration page.
Table 215: MAC ACL Rule Configuration Fields (Cont.)
Field
Description