D-Link DWL-2600AP User Manual - Peer Switch
Configuring Advanced Settings
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 627
D-Link UWS User Manual
Peer Switch
The Peer Switch Configuration feature allows you to send a variety of configuration information from one
switch to all other switches. In addition to keeping the switches synchronized, this function allows you to
manage all wireless switches in the cluster from one switch. The
Peer Switch Configuration Request Status
page provides information about the status of the configuration upgrade on the switches in the cluster.
Figure 392: Peer Switch Configuration Request Status
To initiate a configuration update on a specific peer switch, select the box next to the IP address of the peer
switch to update, and then click
Start
. To update all peer switches, click
Start All
.
The following table describes the fields on the
Peer Switch Configuration Request Status
page.
Table 359: Peer Switch Configuration Request Status
Field
Description
Configuration Request Status
Indicates the global status for a configuration push operation to one or
more peer switches. The status can be one of the following:
• Not Started
• Receiving Configuration
• Saving Configuration
• Success
• Failure—Invalid Code Version
• Failure—Invalid Hardware Version
• Failure—Invalid Configuration
Total Count
Indicates the number of peer switches included at the time a
configuration download request is started, the value is 1 if a download
request is for a single switch.
Success Count
Indicates the total number of peer switches that have successfully
completed a configuration download.
Failure Count
Indicates the total number of peer switches that have failed to
complete a configuration download.
Peer IP Address
If one or more peer switches are present, lists the IP address of each
switch in the cluster and indicates the configuration request status of
that switch.