Oki ES8453 MFP User Manual - Management
Management
Item
Factory
default
setting
Description
Default Mode
Home
Sets the default mode screen of this machine.
Operation
Clear
Operation Timeout
3
Sets time for automatic reset of screen to
begin.
Available range: 1 to 10 minutes
Clear After Job
OFF
Sets whether to reset after job is completed.
Sound
Control
Key Touch Tone
Volume
Middle
Sets the volume of the key-touch tone.
Copy Buzzer Volume
Middle
Sets the volume for the copy complete
sound.
FAX Buzzer Volume
Middle
Sets the volume for the transmission
complete sound.
JAM Buzzer Volume
Middle
Sets the volume for the paper jam alert tone.
AirPrint Buzzer
Volume
Low
Sets the AirPrint confirmation operation
sound.
Local
Interface*
1
USB
Menu
USB
Enable
Sets whether to enable USB.
Soft Reset
Disable
Sets whether to enable the soft reset
command.
Speed
480Mpbs
Selects the maximum transfer speed of USB
interface.
Offline
Receive
Disable
Set whether to receive data in offline state or
in recoverable error state.
Serial
Number
Enable
Sets whether to use a USB serial number.
USB
Assignment
IPP
Selects IPP-USB or Legacy for USB
assignment.
When scanning via USB, select Legacy.
System
Setup
Access Control
Disable
Sets access control.
User Authentication
Method
Local
Display condition: [Access Control] is set to
[User] or [Password].
Unit of Measure
Millimeter or
Inch
Selects a displayed unit (millimeter / inch).
Default Paper Size
A4 or Letter
Sets the default paper size.
Date Format
dd/mm/yyyy
or
mm/dd/yyyy
Sets the date format.
Allow All Reports To
Disable
Sets whether to allow printing reports with
personal information.
Near Life LED
Enable
Sets whether to light an LED if a near life
warning occurs.
Status in Near Life
Enable
Sets whether to display a message if a near
life warning occurs.
1004