Oki ES8453 MFP User Manual - Color Menu
Yellow
0
in print density and frequency. Change the setting if
the background is dark.
Magenta 0
Cyan
0
Moisture Control
Off
Sets whether to enable the condensation control.
Narrow Paper Speed Mode1
Sets the printing speed of narrow paper.
Warmup Control
Off
Sets how warmup is performed.
Position
Adjust
Tray 1
X Adjust 0 mm
X Adjust: Adjusts the position of the entire printing
image perpendicular to the direction of paper
movement.
Available range: ±2.00 mm (0.25 increments).
Y Adjust: Adjusts the position of the entire printing
image parallel to the direction of paper
movement.
Available range: ±2.00 mm (0.25 increments).
Duplex X Adjust: Adjusts the position of the image
on the back side of a duplex print perpendicular to
the direction of paper movement.
Available range: ±2.00 mm (0.25 increments).
Duplex Y Adjust: Adjusts the position of the image
on the back side of a duplex print parallel to the
direction of paper movement.
Available range: ±2.00 mm (0.25 increments).
Y Adjust 0 mm
Duplex
X
Adjust
0 mm
Duplex
Y
Adjust
0 mm
Tray
2/3/4
(Optional)
X Adjust 0 mm
Y Adjust 0 mm
Duplex
X
Adjust
0 mm
Duplex
Y
Adjust
0 mm
MP Tray
X Adjust 0 mm
Y Adjust 0 mm
Duplex
X
Adjust
0 mm
Duplex
Y
Adjust
0 mm
Drum Cleaning
OFF
Sets whether to clean the drum before printing. The
image quality improvement may be expected.
Hex Dump
OFF
Prints out the data received from the host computer
in hex. To finish printing, turn the machine off.
Color Menu
Item
Factory
default
setting
Description
Density Control
Auto
Select "Auto" or "Manual" for adjusting density.
Adjust Density
-
Adjusting density is performed right after this menu is
selected.
Color Tuning / Print
Pattern
-
A test page is printed for checking the adjusting value to
be entered for any other C/M/Y/K Tuning menus.
Cyan
Tuning
Cyan
Highlight
0
Adjust the value for Highlight / Mid-tone / Dark of each
color within a range of -3 to +3.
989