Oki ES8453 MFP User Manual - Setting Fax Detection Mode
Setting Fax Detection Mode
Set the machine so that it can determine whether the sender is sending a fax while the
recipient is holding the handset of the external telephone after picking it up to answer the
call when the telephone rings in Tel/Fax Ready mode.
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Fax Setting].
6.
Press or several times and press [CNG Detection] and set it
to [ON].
Memo
Pressing [CNG Detection] switches between [ON] and [OFF].
[ON]: The machine detects fax beep signals, and then automatically starts receiving
a fax.
[OFF]: If the sender is sending a fax, the machine receives a fax with manual
reception.
7.
Press [Back] until the home screen is displayed.
542