Oki ES8453 MFP User Manual - Loading Custom Size Paper
Printing on Custom Size Paper
For Windows PCL Printer Driver
Set a custom paper size and paper type on the operator panel. Then, register a paper size
with a printer driver.
Available paper size
Tray 1
Width 105 to 297 mm (4.1 to 11.7 inches), Length 148 to 431.8 mm (5.8 to
17 inches)
Tray 2/3/4
(Optional)
Width 148 to 297 mm (5.8 to 11.7 inches), Length 182 to 431.8 mm (5.8 to
17 inches)
MP tray
Width 64 to 297 mm (2.5 to 52 inches), Length 90 to 1321 mm (3.5 to
52 inches)
Note
Register paper in portrait, and load paper in a tray in portrait.
If the paper length exceeds 432 mm (17 inches), use the Rear Output Tray.
This function may not be available for some applications.
If the paper length exceeds 432 mm (17 inches), the print quality cannot be guaranteed.
If paper is so long that it exceeds the paper supports of the MP tray, support the paper with
your hands.
It is not recommended to use a paper width of less than 100 mm (3.9 inches), because
paper jams may result.
About available paper sizes for each tray and for duplex printing
The auto tray switch function is set to [ON] by factory default. When a tray runs out of paper
during printing, another tray automatically starts feeding paper. To feed custom size paper
from a specified tray, set the auto tray switch function to [OFF].
If images are not correctly printed on large size paper, selecting [Standard (600x600dpi)] for
[Print Quality], image in the PS printer driver may allow for correct printing.
Loading Custom Size Paper
When printing on custom paper size, change the paper type setting, and specify a paper
tray.
1.
Load paper that can be set to the custom size in Tray 1, Tray 2, 3
or 4 (optional).
2.
Press [Device Settings] on the touch panel.
305