Oki ES8453 MFP User Manual - page 881
Using Configuration Tool (Windows Only)
You can set Power Save mode from Configuration Tool.
Set the length of idle time before entering Power Save mode.
For details on Configuration Tool, refer to "
".
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Click the [Device Setting] tab.
4.
Click [Menu settings].
5.
Click (Display administrator settings).
6.
Enter the administrator password, and then click [OK].
7.
Click in order of [Admin Setup] > [Management] > [Power
Save].
8.
Select the transition time from [Power Save Time], and then click
(Save to device).
Available transition time settings
1 minute*,
2 minutes,
3 minutes,
4 minutes,
5 minutes,
10 minutes,
15 minutes,
30 minutes,
60 minutes
* indicates the factory default setting.
880