Oki ES8453 MFP User Manual - Enabling The Access Control
of
1267
Enabling the Access Control
Before enabling access control of the machine, you need to register user information on the
web page of the machine.
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [OK].
5.
Press [Management].
6.
Press [System Setup].
7.
Press [Access Control] to set it to [Enable].
Memo
Pressing [Access Control] switches between [Enable] and [Disable].
When the access control is enabled, the following screen appears (when the
authentication type is Local).
1014