Oki ES8453 MFP User Manual - Setting In The Adf
of
1267
Setting in the ADF
1.
Set a document face up in the ADF.
If [Direction] is set to [Top Edge on Top], set the document so that its left edge is
pulled into the ADF first.
If [Direction] is set to [Top Edge on Left], set the document so that its top edge is
pulled into the ADF first.
2.
Align the document guide to the document width.
Note
If ADF paper feed problems often occur, reduce the number of document pages to set.
Documents of up to 100 sheets (80 g/m
2
) and 10 mm high can be loaded regardless of
the size.
For curled documents, make sure that the document guides fit to the document width.
868