Oki ES8453 MFP User Manual - Paper Storage
also be of the rectangular flap type, with glue that remains intact when subjected to
hot roll pressure fusing in the machine. Window envelopes are not suitable.
Labels
Labels must be of the type recommended for use in copiers and laser printers, in
which the base carrier page is entirely covered by labels. Other types of label stocks
may damage the machine due to the labels peeling off during the printing process.
Paper storage
Store paper under the following conditions to maintain quality.
Inside a cabinet or other dry and dark place
On a flat surface
Temperature: 20
℃
Humidity: 50% RH (relative humidity)
Do not store paper in the places as shown below:
Directly on the floor
Where paper is exposed to direct sunlight
Near the inside of an exterior wall
On an uneven surface
Where static electricity may be generated
Where temperature excessively rises high and temperature rapidly changes
Near this machine, an air conditioner, a heater, or duct
Note
Do not unwrap paper until just before you use.
Do not leave paper unwrapped for a long period. Doing so may result in printing problems.
About Paper Sizes, Weight, and Number of Sheets That
Can be Loaded
The following paper types and tray capacity can be loaded in each tray.
Loading in Tray 1
Available paper size
Tray capacity
Paper weight
A3
A4
A5
*
A6
*
B4
B5
B6
Tabloid
Letter
Legal (13 inches)
300 sheets
(if paper weight is 80 g/m
2
)
Light
(64 to 82 g/m
2
)
Medium Light
(83 to 90 g/m
2
)
Medium
(91 to 105 g/m
2
)
Heavy
(106 to 128 g/m
2
)
Ultra Heavy1
(129 to 188 g/m
2
)
854