Oki ES8453 MFP User Manual - Setting Margins (Margin)
Setting Margins (Margin)
Copying with Margins on One Side
Copying with Margins on Both Sides
The margin function enables you to set margins. This function is useful when you want to
staple or punch holes in copies. You can set the top, bottom, right, and left margins by
specifying the [Top] and [Left] values.
For Portrait Printing
Specifying the left margin is suitable for long edge binding printing.
Specifying the top margin is suitable for short edge binding printing.
For Landscape Printing
Specifying the left margin is suitable for short edge binding printing.
Specifying the top margin is suitable for long edge binding printing.
Note
A part of a document may not be copied.
The specified margin values stay active even after you change the zoom rate.
To copy a document in your preferred orientation, specify the orientation in [Direction] in
advance.
Changing the Document Orientation (Direction)
Memo
If all the values are set to [0], [Margin] is disabled.
You can set [Margin] as default so that you do not have to set margins every time you make
copies.
The value of the margin can be changed from [Device Settings] > [Admin Setup] > [Copy
Setup] > [Default Settings] > [Margin].
Copying with Margins on One Side
144