Oki ES8453 MFP User Manual - Setting A Network Scan
Setting a Network Scan
Exporting Network Scan Settings to a File
Importing Network Scan Settings from a File
Deleting Network Scan Settings
Network Scan Manager in the User Setting plug-in allows you to register and edit addresses
to use for the network scan functions such as Scan to PC. The following section describes
some functions.
If you click (Save to device), the changed settings are reflected to the machine.
Before using Network Scan Manager, install the User Setting pug-in.
How to install plug-ins
About icons
Exporting Network Scan Settings to a File
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the network scan settings you want to
export from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Network Scan Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click
(Export to file).
7.
Enter the name of a file, select a save destination folder, and then
click [Save].
Note
After exporting, the edited CSV file may not restore properly.
Importing Network Scan Settings from a File
1198