Oki ES8453 MFP User Manual - page 222
information for Scan To Computer.
1.
Click [Start], and then select [All Programs] > [Okidata] >
[ActKey] > [Tools] > [Network Configuration].
2.
Right-click [Show Network Configuration] in the task tray.
3.
Select the scanner driver to be used, and then select [Properties]
from the [Scanner] menu.
4.
Click the [Register] tab.
As the computer information, the computer name, IP address and port number are
displayed. You do not need to set the computer name, because the computer's host
name is automatically acquired.
Although the setting value of the computer's IP address is automatically displayed, if
multiple network cards are installed in the computer, multiple IP addresses are
displayed. Select the IP address of the network card that is currently used. Change
the current setting for the port number that is displayed if necessary.
5.
After all settings are complete, click the [Register] button to
register the setting to the machine.
If the machine is tuned off and cannot be connected, an error occurs when registering.
If the computer information, such as computer name, IP address, and port number, is
changed, you need to newly register the information following the procedure above.
Using the Network Scanner Setup Tool (Mac OS X Only)
221