Oki ES8453 MFP User Manual - Scanning
Using the WIA Driver (Windows Only)
This section describes how to start scanning from a WIA compatible application via USB or
WSD Scan connection.
Memo
The WIA driver does not support the network scan function. Connect the machine to a
computer via a USB interface or WSD Scan.
The WIA driver does not support Mac OS X.
The WIA 2.0 driver supports Windows 8.1/Windows Sever 2012 R2/Windows 8/Windows
Server 2012/Windows 7/Windows Server 2008 R2.
The WIA 1.0 driver supports Windows Vista/Windows Server 2008/Windows Server 2003.
To scan using WIA Driver, preparation procedure such as installation of the scanner driver is
required.
You also need to set the machine in the stand-by mode for Remote Scan before starting
scanning on the computer.
Scanning
Memo
The following procedure uses PaperPort as an example.
1.
Set a document in the ADF or on the document glass.
2.
Start Adobe Photoshop CS3 on the computer.
3.
Select [Import] from [File], and then select [WIA: OKI Universal
WIA] for the USB connection or select [WIA-OKI-XXXXX] for the
WSD scan.
4.
Click [Scan].
5.
Select a paper feed method.
6.
Select an image type.
7.
Specify the area to scan.
8.
Click [Scan].
9.
To complete scanning, click [Cancel].
272