Oki ES8453 MFP User Manual - page 785
Copying cannot be
made to a device
by performing
cloning with the
following functions.
E-mail Address
Manager
Speed Dial
Manager
Profile Manager
Network Scan
Manager
Auto Delivery
Manager
Information that is to be
replaced in the copy
destination device is locked
because it is being edited or
used.
Unlock the used information
before performing cloning.
-
If I perform cloning
with Auto Delivery
Manager, the
following settings
are also copied.
E-mail Address
Manager
Speed Dial
Manager
Profile Manager
If e-mails or speed dials are
used for the auto delivery
settings of the copy source
device, these settings also
need to be copied at the
same time.
To copy only the auto
delivery settings, delete the
e-mail, speed dial, or other
settings from the copy
source device before
performing cloning.
-
[Alert Info] tab
Symptom
Cause
Solution
Reference
Cannot enable an alert
on the [Alert
Info(Detect and notify
of device events)]
screen
[Save the Log
setup] in this
machine is
disabled.
Follow the procedure below:
1. Press [Device Settings], select
[Admin Setup] > [Management] >
[Job Log Setup] > [Save Job Log],
and then select [Enable].
2. Press [Yes] on the confirmation
screen to reboot the machine.
3. Click [Update device] on the
[Alert Info(Detect and notify of
device events)] screen.
784