Oki ES8453 MFP User Manual - 10.
9.
Click [Next] on the [IP Filter Description and Mirrored property]
screen.
10.
Click [Next] on the [IP Traffic Source] screen.
11.
Click [Next] on the [IP Traffic Destination] screen.
12.
Click [Next] on the [IP Protocol Type] screen.
13.
Click [Finish].
Setting Filter Actions
1.
Click [OK] in the [IP Filter List] window.
2.
Select a new IP filter from the list on the [Security Rule Wizard],
and then click [Next].
3.
Click [Add] on the [Filter Action] screen.
4.
Click [Next] in the [Filter Action Wizard].
5.
Enter [Name] and [Description] on the [Filter Action Name] screen.
6.
Select [Negotiate security] on the [Filter Action General Options]
screen, and then click [Next].
7.
Select [Do not allow unsecured communication] on the
[Communicating with computers that do not support IPsec]
screen, and then click [Next].
8.
Select [Custom] on the [IP Traffic Security] screen, and then click
[Settings].
9.
Set in the [Custom Security Method Settings] window, and then
click [OK].
Note
Select the same value specified in [IKE Encryption Algorithm], [IKE Hush Algorithm], and
[Diffie-Hellman group] in the "Phase1 Proposal" setting in "
".
10.
Click [Next] on the [IP Traffic Security] screen.
11.
Select the [Edit Properties] check box, and then click [Finish].
1144