Oki ES8453 MFP User Manual - page 247
Deleting a Registered Destination (Profile)
You can delete a destination (profile) in the following three ways. This manual recommends
to use Configuration Tool or the Web page where you can enter information with the
computer keyboard.
Deleting a Destination (Profile) from Configuration Tool
Deleting a Destination (Profile) from the Web page
Deleting a Destination (Profile) from the Operator Panel
Deleting a Destination (Profile) from Configuration Tool
This section describes the change and deletion methods that use Configuration Tool on a
computer.
If you click (Save to device), the changed settings are reflected to this machine.
Note
To use the Profile Manager, install the User Setting plug-in. You can install the User Setting
plug-in at the same time as when installing Configuration Tool or install the plug-in later.
You must register the machine in Configuration Tool in advance.
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
246