Oki ES8453 MFP User Manual - Setting The Ldap Server
Setting the LDAP Server
Memo
For details on the LDAP server and encryption setting, contact your network administrator.
1.
Open the Web page of this machine.
How to log in to the Web page
Checking or Changing the Settings of This Machine from a Computer
2.
Log in as the administrator.
How to log in as the administrator
Checking or Changing the Settings of This Machine from a Computer
3.
Select [Admin Setup].
4.
Select [Network] > [LDAP].
5.
Enter the domain name or IP address of the LDAP server in [LDAP
Server].
6.
Enter the port number of the LDAP server in [Port Number].
7.
Specify a value of time-out to wait for the search results in
[Timeout].
8.
Specify the maximum number of the search result entries in [Max.
Entries].
9.
Specify a BaseDN to access the LDAP server in [Search Root].
10.
Enter attribute names to search as the user name in [User Name].
Be sure to enter a value in [Name 1].
11.
Enter an e-mail address to search for in [Mail Address].
12.
Specify a search condition in [Additional Filter] if necessary.
13.
Select a necessary authentication method in [Method].
Note
If you select [Anonymous] or [Simple], user authentication using LDAP fails. You must
select [Digest-MD5] or [Secure Protocol] if you want to set the LDAP server for the user
authentication.
1163