Oki ES8453 MFP User Manual - page 480
Specifying a Scan Size (Scan Size)
You can specify the suitable size to scan a document.
1.
Press [Fax/Internet Fax] or the
(FAX) button.
2.
Set a document in the ADF or on the document glass.
3.
Press [Internet Fax].
4.
Press [Scan Size] on the [Basic] tab.
Memo
Alternatively, you can set this setting from [Function Settings].
5.
Select a size.
Memo
Both ADF and the document glass automatically detect the following document sizes.
Basis
Detectable Sizes
AB
A3, A4 , A4
, A5 , A5
, A6
, B4, B5 , B5
, Folio
Letter
Tabloid, Letter , Letter
, Legal14, Executive
, Statement
*If Legal14 is detected in the Letter series, the value between Legal13, Legal13.5, and
Legal14 which is specified from [Device Settings] > [Admin Setup] > [Scanner Setup] >
[Default Settings] > [Auto detect Scan Size] > [Legal Size] is set as Scan Size.
If the machine cannot detect document size with the [Scan Size] setting is set to
[Auto], the scanning size selection screen appears when the start button is pressed.
A4 is sent as A4
and Letter is sent as Letter
respectively.
6.
Specify a destination.
Specifying a Destination (Direct Entry)
Specifying a Destination (Address Book/Group List)
Specifying a Destination (One-touch Button)
Specifying a Destination (Transmission History)
Specifying a Destination (LDAP Server)
479