Oki ES8453 MFP User Manual - 10.
Register the numbers of the senders from whom you want to block junk faxes.
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Other Settings].
6.
Press [Block Junk Fax List].
7.
Press [Settings].
8.
Select [Mode2] or [Mode3].
9.
Press [Registered List].
10.
Select a registered box, and then press [Register].
Memo
To change a number that has already been registered, press [Edit] for the box in which the
number you want to change is registered.
11.
Enter the last four to eight digits of the telephone number to block
junk faxes by using the 10-key pad.
12.
Press [OK].
13.
Press [Close] on a confirmation screen.
14.
To continue registering another number, repeat the procedure from
step 10.
Deleting a Registered Number
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
547