Oki ES8453 MFP User Manual - Network Connection Problems
Network Connection Problems
Common to Windows and Mac OS X
Cause
Solution
Reference
Using a cross cable.
Use a straight cable.
-
The machine was
turned on before a
cable was
connected.
Connect cables before turning the machine on.
There is a problem
with the
compatibility with
the hub.
Press [Device Settings], select [Admin Setup] > [Network
Menu] > [Network Setup] > [Network Setting] > [HUB
Link Setting], and then change the setting.
-
The network
connection setting is
incorrect.
This machine cannot connect to a wired LAN and wireless
LAN at the same time. To connect to a wired network, set
the network connection to wired.
For Windows
Cause
Solution
Reference
The IP address
is incorrect.
Check that the same IP address is set for the machine
and the machine's port setting on the computer.
Check that the IP address is not duplicated by another
device.
Check that the correct IP address, subnet mask, and
gateway address are set.
If using OKI LPR Utility, check the IP address setting with
OKI LPR Utility.
747