Oki ES8453 MFP User Manual - Specifying A Document Type
Specifying a Document Type
If you select a document type, the document can be scanned at the most suitable quality.
1.
Press [Scan] or the
(SCAN) button.
2.
Set a document in the ADF or on the document glass.
Memo
When scanning a document with the machine, a document in the ADF is given priority.
Check that there is no document in the ADF when using the document glass.
3.
Select a scan method.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data in USB Memory
Saving Scanned Data in a Shared Folder
Specify a destination by following the procedure for the selected scan method.
4.
Press [Image Settings] on the [Image Settings] tab.
5.
Press [Document Type] and press a document type.
Memo
[Text]: Set when copying a text document.
[Text/Photo]: Set when copying a document having texts and photos. The well-
balanced text and photo are reproduced on an image.
[Photo]: Set when copying photos and graphic documents. Images are reproduced
with the focus on grayscales. In [Photo] mode, it takes longer to scan.
[Photo (Glossy)]: Set when copying a glossy photography or photo documents printed
on glossy inkjet paper. Images are reproduced with the focus on grayscales in
consideration of the glossy.
Note
If you select [Text], the gray level may decrease depending on the document.
If you select [Photo] or [Photo (Glossy)], fine texts or lines may be blurred depending
on the document. It takes longer to scan.
159