Oki ES8453 MFP User Manual - Setting By Using Eap-Tls
Setting by Using EAP-TLS
This machine supports the IEEE802.1X authentication.
Set up this machine and the computer before following the procedure below.
About initial setup and IP address
1.
Open the Web page of this machine.
How to log in to the Web page
Open the Web Page of This Machine
2.
Log in as the administrator.
3.
Select [Admin Setup].
4.
Select [Network] > [IEEE802.1X].
5.
Select [Enable] for [IEEE802.1X].
6.
Select [EAP-TLS] for [EAP Type].
7.
Enter a user name in [EAP User].
8.
Select [Do not use SSL/TLS Certificate for EAP authentication], and
then click [Import].
9.
Enter the file name of the certificate.
You can only import a PKCS#12 file.
10.
Enter the password of the certificate, and then click [OK].
11.
Select [Authenticate Server], and then click [Import].
12.
Enter the file name of the CA certificate, and then click [OK].
Specify the certificate issued by the certificate authority that the RADIUS server
obtained. You can import a PEM, DER, and PKCS#7 file.
13.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
14.
Turn the machine off after this machine becomes online.
15.
Connect the LAN cable to the network interface connector.
16.
Connect the LAN cable to the authentication port of an
1161