Oki ES8453 MFP User Manual - Scanning From Actkey
Scanning from ActKey
Memo
To scan using ActKey, preparation procedure such as installation of the scanner driver is
required.
You also need to set the machine in the stand-by mode for Remote Scan before starting
scanning on the computer.
1.
Set a document in the ADF or on the document glass.
2.
Click [Start], and then select [All Programs] > [Okidata] >
[ActKey] > [ActKey].
If the scanner selection screen is displayed, select [OKI Universal Twain USB] for a
USB connection or [OKI Universal Twain ****** (*; the last six digits of the MAC
address)] for a network connection, and then click [OK].
3.
Click a scan button.
Scanning starts.
A scanned image is opened with a selected application, saved in a folder, or sent with
PC-FAX according to the scan button you click.
Memo
If you select [Application1] or [Application2], the application specified by ActKey or Default
program in Windows, which associates with the file type starts, and the scanned document
is displayed in the application.
If you select [Folder], the scanned document is saved in the specified folder.
If you select [PC-Fax], the fax transmission application starts, and the scanned document is
sent to the application. Send a fax with the fax transmission software on your computer.
262