Oki ES8453 MFP User Manual - page 215
Before Using Scan To Computer
Before Using Scan To Computer with ActKey
Before Using Scan To Computer with WSD Scan
Before Using Scan To Computer with Image Capture (Mac OS X)
To use the Scan To Computer function, you need the following settings depending on your
OS and connection method.
Note
To connect the machine to a network, set the following.
Set the [TCP/IP] setting of the machine to [Enable].
Match the IP version between the machine and a computer.
Set the DNS server.
Memo
You cannot send an image to multiple computers at the same time with this function.
The required software varies depending on the OS of your computer and the function to use.
Install the appropriate software.
On the Windows computer, Scan To Computer function can be used with ActKey or WSD
Scan.
Refer to the following.
Before Using Scan To Computer with ActKey (Windows)
Before Using Scan To Computer with WSD Scan (Windows)
If you use Mac OS X, you can use Image Capture.
Refer to the following.
Before Using Scan To Computer with Image Capture (Mac OS X)
Before Using Scan To Computer with ActKey
1.
Set the machine for using Scan To Computer.
Refer to the following.
Setting for Using Network TWAIN (Network Connection)
2.
Install the scanner driver and ActKey.
Installing a Driver and Software to a Computer
If you use the network connection, perform the following steps.
3.
Register a destination computer that is used for Scan To Computer
214