Oki ES8453 MFP User Manual - Adjusting Brightness
Adjusting Brightness
To change the brightness of the touch panel on the operator panel, perform the procedure
below.
You can adjust the brightness of screen during operation and in the Power Save mode
respectively.
1.
Press [Device Settings] on the touch panel.
2.
Press or several times, and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press or several times, and press [Management].
5.
Press [System Setup].
6.
Press or several times, and press [Panel Brightness During
Operating] or [Panel Brightness While Power Save].
7.
Enter value and press [OK].
Available values are from 1 to 7. The bigger the number is, the brighter the screen
gets.
841