Oki ES8453 MFP User Manual - Block Junk Fax
Block Junk Fax
Registering (If Selecting [OFF] or [Mode1])
Registering (If Selecting [Mode2] or [Mode3])
You can block unwanted faxes by setting to receive faxes only from registered speed dial
numbers, or rejecting reception from specific registered numbers.
There are three ways to block unwanted junk faxes.
Mode
Description
Mode
1
This mode rejects the senders who are not registered in the speed dial numbers.
If the last four digits of a registered fax number match the sender ID, reception is
allowed.
Mode
2
This mode rejects the senders with the numbers that are registered to block junk faxes.
Register four to eight digits of a fax number.
You can enter up to 10 numbers.
Mode
3
This mode is a combination of Mode 1 and Mode 2.
This mode rejects the senders who are not registered in the speed dial numbers.
This mode also rejects the senders who are registered to block junk faxes.
OFF
Junk faxes are not blocked.
Registering (If Selecting [OFF] or [Mode1])
1.
Press [Device Settings] on the touch panel.
2.
Press or several times and press [Admin Setup].
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Other Settings].
6.
Press [Block Junk Fax List].
7.
Press [Settings].
8.
Select [OFF] or [Mode1].
Registering (If Selecting [Mode2] or [Mode3])
546