Oki ES8453 MFP User Manual - page 1225
This section describes how to forward selected print jobs to a registered printer using the
OKI LPR Utility. This section also describes how to automatically forward a print job to a
different registered printer when a problem occurs on the forward destination printer.
Forwarding the Selected Print Jobs
Note
Print jobs can only be forwarded to an OKI printer of the same model as your printer.
Before forwarding a job, you must add an OKI printer of the same model.
1.
Start OKI LPR Utility.
2.
Select [Job Status] from the [Remote Print] menu.
3.
To forward a print job, select a job, select [Redirect] from the [Job]
menu, and then select the destination printer.
Forwarding Print Jobs Automatically
If you are unable to print because the selected printer is busy, offline, out of paper, or
due to other reasons, you can set so that a print job can be automatically forwarded to
another OKI model printer.
Note
Print jobs can only be forwarded to the same OKI model printer as the one you are using.
Before forwarding a job, you must add another same OKI model printer.
You must log in as the administrator.
1.
Start OKI LPR Utility.
2.
Select the printer to set.
3.
Select [Confirm Connections] from the [Remote Print] menu.
4.
Click [Details].
5.
Select the [Automatic Job Redirect Used] check box.
6.
To forward jobs only if an error occurs, select the [Redirect only at
the time of an error] check box.
7.
Click [Add].
8.
Enter the forwarding destination IP address, and then click [OK].
9.
Click [OK].
1224