Server Technology Switched Rack PDU Installation And Operation Manual - page 119
Switched PDU
Installation and Operations Manual
Advanced Operations 119
Setting the user membership attribute:
The User Membership Attribute is a comma-delimited string of up to two attribute names whose values in the search
results are the users that are members of the LDAP group. Maximum number of characters is 61.
NOTE: The user membership attribute option allows the searching of group directory names by a user membership attribute to find the
groups for which the user is a member.
To set user membership attribute:
At the Switched CDU: prompt, type set ldap groupsearch userattr and press Enter.
Then at the following prompt, type the group membership attribute and press Enter.
Example
The following sets the user membership attribute to Test
Switched CDU: set ldap groupsearch userattr
Enter Group Member Attribute :
Test
Setting the user search base Distinguished Name (DN):
The Set LDAP UserBaseDN command is used to set the base (DN) for the login username search. This is where the
search will start, and will include all subtrees. Maximum size is 100 characters.
To set the user search base DN:
At the Switched CDU: prompt, type set ldap userbasedn and press Enter. At the following prompt, type the search
base DN and press Enter.
Example
The following sets the DN user search base for MSAD to ‘cn=Users,dc=servertech,dc=com’:
Switched CDU: set ldap userbasedn
Enter User Search Base DN (Max characters 100):
cn=Users,dc=servertech,dc=com
Setting the user search filter:
The Set LDAP UserFilter command is used to set the search filter for the username entered at the login prompt.
The search filter must be entered within parenthesis and adhere to the following format:
(searchfilter=%s)
where ‘searchfilter’ is the name of the attribute in the user class which has a value that represents the user’s login
name. In this string, the ‘%s’ will be replaced by the entered username. Maximum string length is 100 characters.
To set the user search filter:
At the Switched CDU: prompt, type set ldap userfilter and press Enter.At the following prompt, type the User
Search Filter and press Enter.
Example
The following sets the user search filter for MSAD to ‘samaccountname’:
Switched CDU: set ldap userfilter
Enter User Search Filter (Max characters 100):
(samaccountname=%s)