Server Technology Switched Rack PDU Installation And Operation Manual - page 142
142 Advanced Operations
Switched PDU
Installation and Operations Manual
Upload/Download Process
GETting a configuration file (Download):
1. Open the FTP client.
In a Windows environment, in the Run window type ftp and press Enter.
2. At the prompt, type open, followed by the IP address of the PDU and press Enter.
FTP> open 12.34.56.78
3. Authenticate with the appropriate administrative username and password.
4. At the prompt, type get, followed by the filename and press Enter.
FTP> get config.bin
5. At the prompt, type close to close the connection to the PDU.
FTP> close
PUTting a configuration file (Upload):
NOTE: Uploading the CONFIG.BIN file takes considerably longer than the NETWORK.INI file. When uploading both, Server
Technology recommends uploading the NETWORK.INI file first.
1. Open the FTP client.
In a Windows environment, in the Run window type ftp and press Enter.
2. At the prompt, type open, followed by the IP address of the PDU and press Enter.
FTP> open 12.34.56.78
3. Authenticate with the appropriate administrative username and password.
4. At the prompt, type put, followed by the filename and press Enter.
FTP> put network.ini
5. At the prompt, type close to close the connection to the PDU and force a restart of the device.
FTP> close