Server Technology Switched Rack PDU Installation And Operation Manual - page 91
Switched PDU
Installation and Operations Manual
Operations 91
UPS Administration
Creating a UPS record
The Create UPS command adds a new UPS device to the PDU.
To create a UPS record:
At the Switched CDU: prompt, type create UPS and press Enter.
At the prompt, type the corresponding number from the list of the UPS types and press Enter.
At the Host Name: prompt, type the UPS’s IP address or hostname and press Enter.
NOTE: Both IPv4 and IPv6 formats are accepted for IP address or hostname.
Example
The following command creates a UPS record for a Toshiba UPS with the hostname “DC1Toshiba1”:
Switched CDU: create ups
UPS types:
1 -- Generic
2 -- Liebert
3 -- MGE
4 -- Tripp Lite
5 -- APC
6 -- HP
7 -- Minuteman
8 -- Mitsubishi
9 -- Powerware
10 -- Toshiba
11 -- Falcon Electric
Select type(1-11): 10
Host/IP: DC1Toshiba1
Removing a UPS record:
The Remove UPS command removes a UPS record.
To remove a UPS record:
At the Switched CDU: prompt, type remove ups and press Enter.
At the prompt, type the index number of the UPS to be removed and press Enter.
Example
The following command removes the UPS record at index 3:
Switched CDU: remove ups
1 Type: Liebert
Host/IP: DC1Liebert1
2 Type: Powerware
Host/IP: DC1Powerware1
3 Type: Toshiba
Host/IP: DC1Toshiba1
Select UPS(1-8): 3