Server Technology Switched Rack PDU Installation And Operation Manual - page 36
36 Operations Switched PDU
Installation and Operations Manual
Enabling or disabling the Command Line Interface (CLI):
This option enables or disables availability of the CLI for issuing action commands to the PDU. If disabled, only the
firmware Web user interface will be available.
Click on the Edit link in the Action column next to the port to be configured.
On the following Serial Ports Edit page, select Enabled or Disabled from the CLI drop-down menu and click Apply.
Enabling or disabling the Serial Command Protocol (SCP):
This option allows SCP functions to be enabled or disabled for a specific serial port.
Click on the Edit link in the Action column next to the port to be configured.
On the following Serial Ports Edit page, select Enabled or Disabled from the SCP drop-down menu and click Apply.
NOTES:
Upon a coldboot of the system, if the Coldboot Alert feature is enabled, the system will send a ½ second RS-232 break out to any
SCP-enabled serial ports.
The SCP option must be enabled to use the Bluetooth Android solution.
Enabling or disabling the Serial Command Protocol (SCP) emulation:
This option notifies SCP of an MRV device on a specific serial port.
Click on the Edit link in the Action column next to the port to be configured.
On the following Serial Ports Edit page, select None or MRV from the SCP Emulation drop-down menu and click
Apply.
Enabling or disabling the RFTAG option:
This option makes RF Code sensor tags available for the Server Technology wireless monitoring solution.
Click on the Edit link in the Action column next to the port to be configured.
On the following Serial Ports Edit page, select Enabled or Disabled from the RFTAG drop-down menu and click
Apply.