Server Technology Switched Rack PDU Installation And Operation Manual - page 144
144 Advanced Operations
Switched PDU
Installation and Operations Manual
Supported Operating Systems
Remote Shutdown Agents are available for the following operating systems:
Windows
2000, 2003, XP
Linux
Red Hat 7.3, 8.0
Red Hat Enterprise 2.1 ES (update 5), 3.0 ES (update 4)
Novell SUSE Linux Enterprise Server
Unix
HP-UX 11.0, 11i v1, 11i v2
IBM AIX 4.3, 5.3
Sun Solaris 8, 9, 10
Novell Netware 6
Shutdown Agent Installation
Windows
1. Browse to the location of the Remote Shutdown Agent install files.
2. Run Setup.exe by double-clicking on the icon.
3. Reply to the standard installation prompts.
4. For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.
Linux
1. Browse to the location of the Remote Shutdown Agent install files.
2. Run SetupRA.
3. For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.
Unix
1. Browse to the location of the Remote Shutdown Agent install files.
2. Run Install.
3. For additional security, when prompted enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU device may send a shutdown signal to the server.
Netware
1. Browse to the location of the Remote Shutdown Agent install files.
2. From the NetWare system console, load the configuration module (pmconfig.nlm) using the default path.
3. For additional security, when prompted, enter the IP address of the PDU that will be sending the shutdown
signal.
NOTE: If left blank, any PDU can send a shutdown signal to the server.