Server Technology Switched Rack PDU Installation And Operation Manual - page 60
60 Operations Switched PDU
Installation and Operations Manual
Displaying the status of the environmental monitor:
The Envmon command displays the status of the integrated Environmental Monitor.
By default, only administrative user accounts are allowed access to the Envmon command. An administrator can use
the Set User Envmon command to enable and disable access for other user accounts.
To display the status of the Environmental Monitor:
At the Switched CDU: prompt, type envmon and press Enter.
Example
The following command displays the status of the Environmental Monitor.
Switched CDU: envmon
Environmental Monitor .A
Name: Florida_HQ_1 Status: Normal
Temperature/Humidity Sensors
ID Name Temperature Humidity
.A1 Temp_Humid_Sensor_A1 Not Found Not Found
.A2 T/H2_Florida_HQ_1 23.5 Deg. C 22 % RH
Changing a password:
The Password command changes the current user’s password. For security, when you type a password, the characters
are not displayed on the screen. For more information, see the “Usernames and Passwords” section.
To change a password:
At the Switched CDU: prompt, type password and press Enter.
At the Enter Current Password: prompt, type the current password and press Enter.
At the Enter New Password: prompt, type the new password and press Enter. Passwords can contain 1-16 characters.
At the Verify Password: prompt, retype the new password and press Enter.
Starting a new session:
The Login command activates the Username: prompt. The current session ends, allowing a user to log in and start a
new session under a different username.
To start a new session:
At the Switched CDU: prompt, type login and press Enter. The Username: prompt appears.
Ending a session:
The Quit or Logout commands ends a session. A session ends automatically when no activity is detected for five
minutes, or upon loss of connection.
To end a session:
At the Switched CDU: prompt, type quit and press Enter, or
Type logout and press Enter.