B&R Industries Provit 5000 User Manual - page 111
110
Provit 5000 User’s Manual
Controllers • System Units with Socket 370
Because of general PC specifications, this interface should be handled with extreme
care with regard to EMC, location of cables etc. Therefore, it should be only used for
service.
Make sure the connections for the PS/2 keyboard and PS/2 mouse are not swapped.
No device is allowed to be connected, which uses the PS/2 keyboard supply as a
power source.
8.12 Mouse Connection (PS/2)
An interface for the connecting a standard PS/2 mouse is provided on the mainboard. This can
be activated in BIOS in the "BIOS Features Setup" menu (see the section "BIOS Features
Setup").
Mouse Connection (PS/2)
Pin
Assignment
PS/2 socket
1
Mouse DATA
2
3
GND
4
+5 V
5
Mouse CLK
6
Table 82: Mouse interface connection (PS/2)
Setting
PS/2 Keyboard
Interrupt
12
I/O Address
-
Table 83: Standard settings for mouse interface (PS/2)