B&R Industries Provit 5000 User Manual - page 268
Provit 5000 User’s Manual
267
Chapt
er
6
So
ftw
are
Software • BIOS System for System Units with Socket 7 (ZIF)
Used MEM Base Addr
This option makes it possible to reserve a main memory window in the upper
memory area, e.g. for some older ISA network cards. If a starting address is
specified instead of N/A (not available), the option Used MEM Length can be used
to set the size of the memory area required.
Used MEM Length
Sets the size of the memory area to be reserved, starting at the address defined
in Used MEM Base Addr.
2.7 Load BIOS Defaults
Loads BIOS defaults. These are factory settings with standard values, which are defined by the
BIOS manufacturer for the most stable minimal performance system operations.
2.8 Load Setup Defaults
Loads the Setup defaults. These are factory settings which are defined by B&R for optimal
performance of your IPC.