B&R Industries Provit 5000 User Manual - page 296
Provit 5000 User’s Manual
295
Chapt
er
6
So
ftw
are
Software • BIOS for System Unit with Socket 370
Throttle Duty Cycle
When the system enters Doze mode the CPU clock runs only part of the time. You
may select the percentage of time that the clock runs. This setting defines this
frequency in relation to the original system clock.
PCI/VGA Act Monitor
When Enabled, each activity in connection to the VGA controller or monitor results
in the resetting of timers for the standby modes (also see Reload Global Timer
Events).
PowerOn by Ring
When Enabled a signal to the ring indicator (e.g. a incoming call to the modem)
overrides the Powersave modes.
Resume by Alarm
When Enabled you can set the date and time at which the real-time clock awakens
the system out of the Powersave mode.
IRQ 8 Break Suspend
You can switch on or off monitoring of the IRQ8 (the real-time clock) in the
Powersave mode.
Reload Global Timer Events
It is determined here whether activity to the listed components is reset by the timer
when switching on the Powersave mode.
When Enabled, a movement of the device (e.g. mouse movement with a serial
mouse) is regarded as an activity and the switch-off times (for Doze, Standby and
Suspend modes) restart afresh.