B&R Industries Provit 5000 User Manual - page 363
362
Provit 5000 User’s Manual
Technical Appendix • Maintenance Work
4.
Battery position:
5.
Remove the battery from the holder by pulling the removal strip (don't use uninsulated tools
- risk of >short circuiting). The battery should not be held by the edges. Insulated tweezers
may also be used for removing the battery.
6. Insert the new battery with the correct polarity. The removal strip should be protruding from
the battery holder and the "+" side of the battery should be facing downward. To remove the
battery again, the removal strip must protrude from the upper side of the battery.
7
Now wrap the end of the removal strip over the top of the battery and insert it underneath the
battery so that it does not protrude from the battery holder.
8. Put on the housing covering and fasten the screws.
9. Connect the lines to the power supply.
10. Set the date and time
IPC5000/IPC5600
IPC5000C / IPC5600C