B&R Industries Provit 5000 User Manual - page 41
40
Provit 5000 User’s Manual
Controllers • Technical Data
1.3.2 IPC5000C and IPC5600C
Interfaces
COM1
COM2
LPT1
USB
Panelware
Keyboard
Mouse
External Disk Drive
RS232, 16 Byte FIFO
RS232, 16 Byte FIFO
SPP, EPP and ECP modes
2 USB ports
4)
Up to 8 Panelware keypad modules (daisy chained)
Enhanced AT PS/2
PS/2
Yes
VGA Controller
Chips & Technologies C&T65550
5)
Graphic Memory
1 MB
2 MB
2 MB
Interfaces
FPD (Panellink) + CRT (15 pin VGA DSUB connector)
Hard Disk / Silicon Disk
Slots
1
2
1) The quartz used with the IPC has an accuracy of 10 ppm. This means after influences such as operating temperature and wiring of the
quartz have been taken into account, the inaccuracy is typically 2 seconds per day.
2) When using SIMM modules with an operating voltage of 3.3 V and 5 V respectively.
3) For IPCs with a revision number
≤
34.03, only the 256 KB L2 cache is available.
4) Only for system units with revision
≤
34.03; otherwise not available
5) The VGA controller C&T65548 with 1 MB graphic memory is used for system unit 5C5001.01 with a revision number
≤
21.01.
System Units
5C5001.11
5C5001.12
5C5001.21
5C5601.11
5C5601.12
Mainboard General Information
Real-time clock
1)
CMOS backup in the FlashPROM
Temperature monitoring (CPU, I/O, display unit)
Math Processor
Integrated in the processor, no socket
BIOS
AWARD Elite BIOS, Plug and Play compatible
Chipset
Intel 440BX
Processor Socket
Socket 370
Table 20: Technical data for IPC5000C and IPC5600C system units
System Units
5C5001.01
5C5001.03
5C5601.01
Table 19: Technical data for IPC5000 and IPC5600 system units