B&R Industries Provit 5000 User Manual - page 136
Provit 5000 User’s Manual
135
Chapt
er
2
C
on
tro
lle
rs
Controllers • Bus Unit
9.7 IPC5000C and IPC5600C Current requirements / Power consumption
Current requirements are arranged according to the bus units used for Provit IPCs with system
units for socket 370 CPUs.
If you use bus units
•
5C5000.11 (IPC5000, 4 slots, 240 VAC)
•
5C5000.31 (IPC5000, 5 slots, 240 VAC) or
•
5C5600.* (IPC5600, starting from revision number x.x),
the values for power consumption are found in the following table:
If you use bus units
•
5C5000.11 (IPC5000, 2 Slots, 240 VAC)
•
5C5000.02 (IPC5000, 2 Slots, 24 VDC)
•
5C5000.12 (IPC5000, 4 Slots, 24 VDC)
•
5C5000.11 (IPC5000, 2 Slots, 240 VAC)
•
5C5000.22 (IPC5000, 2 Slots, 24 VDC) or
•
5C5000.12 (IPC5000, 5 Slots, 24 VDC),
the values for power consumption can be found in the table on the next page.
IPCs Configuration
Current Requirements
For 5 V
1)
1) Current consumption on the corresponding voltage of the power supply (5 V or 12 V)
For 12 V
Celeron 300, 64 MB DRAM
Celeron 300, 640 MB DRAM
4.2 A
5.2 A
0.2 A
0.2 A
Celeron 366, 64 MB DRAM
Celeron 366, 640 MB DRAM
4.8 A
5.8 A
0.2 A
0.2 A
Celeron 433, 64 MB DRAM
Celeron 433, 640 MB DRAM
5.4 A
5.4 A
0.2 A
0.2 A
Celeron 566, 64 MB DRAM
Celeron 566, 640 MB DRAM
4.2 A
5.2 A
0.2 A
0.2 A
Pentium III 600, 64 MB DRAM
2)
Pentium III 600, 640 MB DRAM
2) Only for IPC5600C
4.8 A
5.8 A
0.2 A
0.2 A
Pentium III 850, 64 MB DRAM
Pentium III 850, 640 MB DRAM
5.4 A
5.4 A
0.2 A
0.2 A
Table 101: Current requirements IPC5000C and IPC5600C