B&R Industries Provit 5000 User Manual - page 73
72
Provit 5000 User’s Manual
Controllers • Provit 5600 IPC Configuration Options
6.10 BIOS Settings for Booting an IPC5600/5600C with Different Peripheral
Devices
From the internal floppy disk drive
Drive A
1.4 M, 3.5"
Drive B
1.4 M, 3.5"
Boot Sequence
A, C, SCSI
Swap Floppy Drive
Enabled
On-Chip Secondary IDE
Settings are irrelevant for this configuration..
From the internal CD-ROM drive
Drive A
Settings are irrelevant for this configuration..
Drive B
Settings are irrelevant for this configuration..
Boot Sequence
CD-ROM, C, A
Swap Floppy Drive
Settings are irrelevant for this configuration..
On-Chip Secondary IDE
Enabled
From the internal LS-120 drive
Drive A
Settings are irrelevant for this configuration..
Drive B
None
Boot Sequence
LS/ZIP, C
Swap Floppy Drive
Settings are irrelevant for this configuration..
On-Chip Secondary IDE
Enabled
From the external floppy disk drive
Drive A
1.4 M, 3.5"
Drive B
None
Boot Sequence
A, C, SCSI
Swap Floppy Drive
Enabled
On-Chip Secondary IDE
Settings are irrelevant for this configuration..
From the internal floppy disk drive (=Drive A) with external floppy disk drive (= Drive B)
Drive A
1.4 M, 3.5"
Drive B
1.4 M, 3.5"
Boot Sequence
A, C, SCSI
Swap Floppy Drive
Enabled
On-Chip Secondary IDE
Settings are irrelevant for this configuration..
From the external floppy disk drive (=Drive A) with internal floppy disk drive (=Drive B)
Drive A
1.4 M, 3.5"
Drive B
1.4 M, 3.5"
Boot Sequence
A, C, SCSI
Swap Floppy Drive
Disabled
On-Chip Secondary IDE
Settings are irrelevant for this configuration..
Table 43: BIOS settings for booting an IPC5600/5600C with different peripheral devices