B&R Industries Provit 5000 User Manual - page 297
296
Provit 5000 User’s Manual
Software • BIOS for System Unit with Socket 370
3.6 PNP/PCI Configuration
PnP OS Installed
When set to AUTO, all Plug & Play compatible and bootable devices are possible
(automatically Windows 95/98/2000 and Linux).
Resources Controlled By
When set to AUTO, all Plug & Play compatible and bootable devices are
automatically configured by the BIOS. When set to Manual, all IRQ and DMA
settings can be made by the user.
Normally (AUTO) during the BIOS system start, all ISA cards resources (I/O
address, IRQ, DMA port, memory) are assigned first and then afterwards all Plug
& Play devices are configured. No manual assignments can be made in the BIOS
Setup for resources from Plug & Play devices. This is only possible with ICU (ISA
Configuration Utility, available directly from Intel) or Windows 95/98/2000 as well
as Linux.
Figure 181: PnP/PCI Configuration