B&R Industries Provit 5000 User Manual - page 164
Provit 5000 User’s Manual
163
C
hapt
er
3
Di
sp
la
y Uni
ts
Display Units • Using Panelware Modules
When connecting Panelware modules to a display unit, it is not possible to operate 128 keys or
128 LEDs on all display units. For the following modules, this depends on the revision number
(on models with a lower revision than the ones shown, only 64 keys or 64 LEDs can be
operated):
This also applies for all display kits (see Chapter 4 "Display Kits"):
With 5600 series display units, it is not possible to connect external keypad modules
because the respective number of keys is already integrated into these displays.
Function keys and keypad modules work parallel to a connected AT keyboard. Up to 8
Panelware modules can be daisy chained in series (taking the maximum amounts of keys and
LEDs into account).
Make sure that inputs and outputs are properly connected to Panelware modules
(labeled on the module) because connecting them incorrectly could damage the
Panelware modules.
The specific connection options to the displays are found in the respective chapters.
Configuration of the keys and evaluation of key strokes is made using Mkey utilities and the Mkey
driver (see the "Provit Mkey Utilities User Manual").
Display Unit
128 Keys / 128 LEDs starting with Rev.
Remark
5D5100.01
11.20
5D5200.01
34.20
5D5200.04
23.20
5D5201.02
22.20
5D5201.03
20.20
5D5202.01
11.20
5D5202.03
Cancelled; replacement type 5D5212.01
5D5500.10
34.20
5D5501.01
31.20
Table 125: Number of keys and LEDs on the display unit
Display Unit
128 Keys / 128 LEDs starting with revision
Remark
5D5000.03
21.20
5D5000.10
10.20
5D5000.14
22.20
5D5000.18
10.20
Table 126: Number of keys and LEDs on the display unit