B&R Industries Provit 5000 User Manual - page 52
Provit 5000 User’s Manual
51
Chapt
er
2
C
on
tro
lle
rs
Controllers • Mounting Instructions
3. Mounting Instructions
•
As standard, the controller is mounted on the back of the display unit (standard
mounting). The option of remote operation is also available (remote mounting), where a
display can be operated by the controller, up to a maximum distance of 10 m.
•
Screws are contained in the delivery for both standard and remote mounting.
•
All connectors must be pointing downwards when mounting the IPC5000/ IPC5000C.
•
The IPC5600/IPC5600C is mounted horizontally, i.e. all connectors must point to the right
(when viewed from behind).
•
In order to guarantee sufficient air circulation, allow a distance
of at least 10 cm between the fans and all other objects.
•
IPC5000/IPC5000C and IPC5600/IPC5600C controllers can be mounted at an angle
of max. ±45°:
If a disk drive or a CD-ROM drive is being operated on a IPC5600/IPC5600C
controller, only an angle of ±25° max. is valid.
Figure 7: Mounting Instructions