B&R Industries Provit 5000 User Manual - page 98
Manual is about: Automation PC
of
400
Provit 5000 User’s Manual
97
Chapt
er
2
C
on
tro
lle
rs
Controllers • System Unit with Socket 7 (ZIF)
7.17 Reset Button
The reset button is accessible through a small hole near the external floppy disk drive interface.
In order to avoid accidental activation, a reset can only be triggered with a pointed object.
7.18 Recovery Jumper / User Jumper
The Recovery Jumper / User Jumper is easily accessible after opening the housing:
7.18.1 Recovery Jumper
Recovery mode is available to the user when the IPC can no longer be booted; due to either an
error in BIOS or a damaged BIOS (e.g. power failure during the BIOS upgrade).
Figure 50: Reset Button
Figure 51: Recovery Jumper / User Jumper IPC5000 (above) and IPC5600 (below)